Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instruction Manual – Time switch Astro
GB
Connection diagram
3. Technical data
Supply voltage
See device
Contact material (115V / 230V)
AgSnO
2
Contact material (12V / 24V)
AgNi
Type of protection
IP 20 to DIN EN 60529
Permitted ambiet temperature
-30°...+55°
Mode of oeration
1 BSTU
Degree of contamination
2
Rated surge voltage
4 kV
Standard
DIN EN 60730-1/DIN EN 60730-2-7
CFL, LED
Ideal for modern lamps
8. Key function
1. To access the Enter-mode from the automatic-mode.
2. To revert to the beginning of the current (sub-) menu.
1. To adjust the flashing digit.
2. To scroll through a choice
1. Automatic-mode: To switch the channel ON or OFF until
the next programming step occurs.
2. Automatic-mode: A push longer than 3 sec. = Permanent
switching status.
1. To activate the time switch when operated without power
/
supply.
2. To confirm the selection or the entered data.
11. Menu overview
OK
OK
OK
**At 2 channel-
version
13. New program
Option
www.hugo-mueller.de
[SC18.x4 easy/ 1704x4 easy/ SC28x3 pro4 / 1724x3pro4 /173113 easy]
1. Safety instructions
The installation and assembly of electrical equipment
!
must be only carried out only by a skilled Person!
Otherwise fire danger or danger of an electric shock
exists!
Connect the supply voltage/frequency as stated on the
!
product label!
Warranty void if housing opened by unauthorised person!
!
The electronic circuit is protected against a wide range of
!
external influences. Incorrect operating may occur if
external influences exceed certain limits
4. Service
Hugo Müller GmbH & Co KG
Karlstraße 90
DE-78054 VS-Schwenningen
+49 7720 80836
www.hugo-mueller.de
9. Handling advice
The time switch is programmable without external
power supply after pressing the
/
To revert one step or one level back while in the
Enter-Mode press
After completion of a (sub-) menu confirming end
will return the device into the automatic-mode.
With
- the choice changes from end to
continue . By confirming continue the time
switch returns to the beginning of the current (sub-)
menu.
When confirming end before completion, the time
switch returns to the automatic-mode without
saving the entered data.
OK
OK
OK
OK
OK
OK
2. Initial operation
The time switch is delivered in sleep-mode, the display is switched off.
Press
/ -button to wake it up.
The current date and time is already programmed and European daylight savings time is activated.
Select the desired language by pressing
step backwards from the current position)
If required, date, time and daylight savings time mode can be adjusted also by pressing
confirmation with
.
When using the astro function it is obligatory to enter the geographical position of the place of the installation of the devic e.
Choose with
-buttons between „Zone" (predefined zip codes) and „Coordinates" (longitude and latitude). Confirm your
choice again with
. (The easiest way is choosing a predefined zip code within the „Zone"-menu.)
Enter the nearest zip code or the geographical coordinates with
Finally, you can activate the Astro-program for the whole week (no offset) by confirming "Astro preprogrammed"! If you
choose "Astro not preprogrammed" you can individually program the Astro -function later in the programming menu. To
complete the initial operations confirm your choice with the
5. Intended use
The device fits for the particular use of the following tasks:
Illumination of private and industrial areas, street and shop-
window lightening, regulation of air conditioning, flushing,
motors, pumps, plants and machinery as well as to
simulate presence etc.
Operate the device in a dry room only! The installation must
be in accordance with the instruction manual. The device is
not qualified for security relevant tasks such as emergency
doors, fire protection equipment
10. Additional adjustments
Menu
Main menu Application
Program query
Program
-button.
Program delete
Program
Date-Time
Adjustment
Summertime
Adjustment
Language
Adjustment
Factory Defaults
Adjustment
Counter
Options
PIN-Code
Options
12. Symbol legend
Channel is switched ON
Channel is switched OFF
For the current date the "holiday program" / "permanent by date" is activated
erm
Standard programming step
OK
OK
Current state is based on a manual over-ride. The state will be cancelled with the next programming
step.
Current state is based on a manual override. The state is permanent until terminate d manual.
erm
Days of the week Monday, Tuesday, ... Sunday;
The underscores indicate if the program is active for the days above.
Astro function: Current state is based on a sunrise or sunset taking into account an optionally adjusted Offset.
The time switch is locked; to unlock the device the PIN has to be entered.
- buttons and confirm it by pressing
. (Remark: By pressing
-buttons and confirm with
button.
6. Battery
7. Permanent
To query the programming steps and remaining memory locations
Deletion of switching time(s). The program for all channels, single channels and single
programming steps within on channel can be deleted.
Adjustment of date and time
Adjustment of the daylight saving time mode (ON/OFF)
Choice of languages
Reset to the state of delivery.
Displays the hour counter and pulse counter for each channel and the time switch
itself.
The time switch can be locked with a 4-digit PIN-Code. The code can be adjusted,
activated and deactivated. If you have forgotten the Code please call customer service.
14. Astro adjustment
Zone = country
OK
OK
OK
OK
OK
ZIP = zip code
OK
15. Programming via NFC (1)
16. Programming via Bluetooth (1)
BA SC18x4easy SC28x3pro4 MP;de,en,fr,it – 23756 - 2019.07V04
you move one
-buttons and a subsequent
Permanent ON / OFF
OK
N
S
OK
W
E
OK
GMT
OK
GMT
Werbung
