Werbung
Hardware Installation
1.
Take out the camera and accessories from the pakage:
The installation sticker and MD-3025.
3.
Paste the sticker to a suitable position, and then fasten
the screws into the mounting hole.
Change the Desiccant
1.
Use a screwdrive to open the cover.
3.
Take out the old desiccant and replace the new one.
MD-3025 / MD-3025-IVS
3-Megapixel IR Vandal Mini Dome IPCAM /
3-Megapixel IR Vandal Mini Dome IPCAM with Video Analytics
2.
Use a screwdrive to open the cover.
4.
Close the cover and fasten the screws.
2.
Use a small screwdrive to open the camera module.
4.
Close the camera module and fasten the screws.
Quick Setup Guide
P1
Werbung
