Einhell Global ST-G 400 E Bedienungsanleitung Seite 9

Anleitung ST-G 400 E - 12 spr.
1
On/Off switch
Switching on: Press the On/Off switch
Continuous operation: Lock the On/Off switch with the
locking button
Switching off: Press the On/Off switch
and release
3
Turn the speed controller to increase the
cutting rate
24.02.2000 16:23 Uhr
2
Locking button
Changing the saw
blade
Insert the saw blade in
the ram up to the stop
and
tight the screw of the
retention clip.
Important: Make sure
that the saw blade sits
properly in the slot of the
roller and ram.
4
Undo the two screws to set the base to an angle of up to
45° on the right or left side.
Seite 9
GB
Releasing the saw blade:
Turn screw anticlockwise.
45°
45°
30°
30°
15°
0°
15°
0°
9