User Manual - Turris Omnia Rtrom01-2G Benutzerhandbuch

USER MANUAL

Before starting up the device, please read this manual carefully,
particularly the router installation instructions and safety information.
CONTENTS
Router Turris Omnia
model: RTROM01-2G (Wi-Fi, 2 GB RAM)
3× Wi-Fi Wall mounting
antenna
INSTALLATION
1 Connect the antennas to the connectors located on the rear panel of the router.
2 Connect your computer and the router with the Ethernet cable.
Use one of the connectors labelled LAN0 to LAN4 on the router.
3 Plug the Ethernet cable from your modem or other device supplied by your Internet
service provider into the WAN connector.
4 Plug the power cable into the router.
Important: Make sure that you are using a power adapter labelled
Turris Omnia (12V, 3,33A).
When booting up, the device gradually lights up the indicator LED's on the front
panel. This is a standard part of the start-up sequence.
5 Wait for about one minute (until the router assigns an IP address), type http://192.168.1.1
into your Internet browser and follow the instructions of the setup wizard.
The current version of the manual is always available on
https://omnia.turris.cz/user_manual.
You can find the documentation and support on https://www.turris.cz.
We will gladly answer your questions on info@turris.cz.
Power adapter,
bracket power cable
Ethernet
cable manual
EN / 13
User