Using your Polka
Installing an Atomizer Head:
Remove the top cap from the battery
by pulling firmly. Use the rectangular
slot on the underside to unscrew
the air pipe from the battery in the
anticlockwise direction and lift the air
pipe out of the device's integral tank.
Drip a few drops of e-liquid into the
internals of the atomizer head before
screwing it onto the air pipe in the
clockwise direction, this will ensure
optimum performance and longevity
of the atomizer head.
4
TW_Polka_Compliant_Manual.indd 4
04/11/2016 09:17