Hama 00221085 Bedienungsanleitung Seite 5

5. Startup and Operation
Warning
• Connect the product only to a socket that has been
approved for the device. The socket must be installed
close to the product and must be easily accessible.
• Disconnect the product from the network using the
power button – if this is not available, unplug the
power cord from the socket.
• When using a multi-socket power strip, make sure that
the sum power draw of all the connected devices does
not exceed its maximum throughput rating.
• If you will not be using the product for a long period
of time, disconnect it from mains power.
• Connect the enclosed power supply unit to the DAB
antenna (pic. 1).
• Connect the DAB antenna to your DAB/FM/UKW tuner
(pic. 1). If necessary, use the enclosed antenna adapter
(pic. 2).
• Perform a channel scan on your DAB/FM/UKW tuner.
• Switch the antenna off using the on/off switch on the
power cable if it is not in use.
Note
Please note that the number and quality of stations
received may vary depending on the position of the
antenna and local conditions.
6. Care and Maintenance
Note
Disconnect the device from the power supply before
cleaning it or if it is not going to be used for a long
period of time.
Only clean this product with a slightly damp, lint-free cloth
and do not use aggressive cleaning agents.
7. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
8. Declaration of Conformity
Hereby, Hama GmbH & Co KG declares that
the radio equipment type [00221085] is in
compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the
following internet address:
https://uk.hama.com
Downloads
00221085
3