Specifications - Tecknet U510P Benutzerhandbuch

Specifications

Product Model TeckNet U510P
Product Name Portable 10
Chassis
Input
Output
LED
Dimensions
Certificates
Installation Guide
1. Connect the AC Power Cord to the Power Adapter and the DC
Output Cord to the TeckNet U510P Charger's corresponding
socket.
2. Connect the AC Power Adapter to an AC power socket.
3. Connect your mobile phone or other devices to the TeckNet U510P
charger using your existing USB charging cables.
4. Disconnect the devices and AC Power Cord from the power socket
when charging or powering is finished.
5. Disconnect the AC Power Cord from the TeckNet U510P Charger
Note
1. The Super Charging Ports will detect any attached devices and will
self-adjust to the optimum charging status thereby avoiding any c
ompatibility issues. It enables the supply of stable, reliable power
for any high power devices such as iPad, iPhone, Galaxy Tab &
Note, Sony Xperia, HTC One etc. Attach devices to the Super
Charging Ports if any potential compatibility issue arises.
2. Specific ports on the TeckNet U510P Charger are designated as
Super Charging Ports while the others are universal charging ports.
3. Check the input voltage of the digital devices is suitable before
initiating the charging process.
4. Use only indoors.
5. During charging, the Smart USB Charging Port Controller of each
Super Charging Port will be automatically optimised to the specific
mode for the attached device. This mode is only for the attached
- port Super Speed USB Charger
Plastic
100~240V AC 50/60HZ
DC 5V 2.1A x10 Each USB Port supports max 2.4A
charging current, total combined output of
21A (105 Watts)
Blue
135 x 68 x 25mm (not including adapter)
CE & RoHs Approval
-- 3 --