Herunterladen Diese Seite drucken

Ossenberg 1855P Gebrauchsanweisung Seite 2

Stock- und stützenhalter

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Stand 18.02.2019
Instruction for use Stickholder and Walking Crutchholder
General product information
The stickholder and crutchholder is used for secure attachment of a crutch at a table or desk. It can be ascribed to
hang by a hook on one side and also with the flat surface on the other side to put on a flat surface (table).
1. Assembly and Application
For attachment pull apart the stock holders and then place it around the tube of your crutch. Push the holder back
until it snapped together.
The hook of the stickholder should face down and it is used exclusively for hanging up the crutch (see picture).
In no case shall the hook point up and while using your stick as a crutch to be used as a holder for bags for
example! In this case, there is a high danger of falling!
2. Material
Plastic
3. Cleaning
Wipe with a damp cloth and possibly with a mild household cleaner and let dry.
4. Disposal
Please inquire with your specialized dealer about the regional waste disposal.
5. Warranty and Liability
You have purchased a high-quality product. If you have a justified complaint, despite highest quality standards, we
are entitled, at our discretion – within a 12-month warranty period - to repair the defective product or to replace it
with an immaculate one.
We cannot assume liability for damages resulting from modifications made to our products.
Not covered by the warranty are damages resulting from ordinary wear and tear or inappropriate use. Wearing parts
are excluded from warranty.
Article 1855P
Seite 2

Werbung

loading