Herunterladen Diese Seite drucken

HBM QuantumX FireWire 1394b Bedienungsanleitung Seite 2

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

NOTES
The notebook does not provide any supply voltage via the FireWire connection cable.
The QuantumX modules must be powered separately (e. g. power pack NTX001). You can
connect up to 12 modules in series (daisy chain) to the adapter (see operating manual
QuantumX). A termination is not necessary.
The adapter has two interfaces with FireWire 1394b. QuantumX can only be connected
via one of these interfaces.
4
Removing the adapter safely
As soon as the adapter is inserted in the notebook, an icon with a green arrow appears in the
notification box (Systray). Click on this icon and then activate "Remove safely". You can then
pull the adapter out of the notebook.
5
Technical data
Connections 1−IF001
Connections 1−IF002
Data transfer rate
Modules
Conformity
Operating temperature range
Cable
 Hottinger Baldwin Messtechnik GmbH.
Modifications reserved. All details describe
our products in general form only. They are
not to be understood as express warranty and
do not constitute any liability whatsoever.
 Hottinger Baldwin Messtechnik GmbH.
Änderungen vorbehalten. Alle Angaben
beschreiben unsere Produkte in allgemeiner
Form. Sie stellen keine Beschaffenheits- oder
Haltbarkeitsgarantie im Sinne des §443 BGB
und begründen keine Haftung.
2 x 1394b FireWire (QuantumX); 1x1394a (not relevant)
1 x 1394b FireWire (QuantumX)
Max. 400 Mbyte/sec
Max. number of modules and connection topologies, see data sheet and operating manual
FCC, CE
o
o
+5
C ... +50
C
KAB270−3 with knurled screws or other standard FireWire cable for a Hub connection
Hottinger Baldwin Messtechnik GmbH
Im Tiefen See 45  64293 Darmstadt  Germany
Tel. +49 6151 803-0  Fax: +49 6151 803-9100
Email: info@hbm.com  www.hbm.com

Werbung

loading

Diese Anleitung auch für:

Firewire 1394b pc-card1-if-001