Werbung
Verfügbare Sprachen
Verfügbare Sprachen
POWER
INTENSITY
PRODUCT FEATURE
●Heating massage, temperature three gear adjustment,M1-M2-M3
●6 Vibration Motors
●3 Massaging modes
●3 Massaging intensity
●2 massage zones, each zone can be operated individually
●The default timing is 15-30-60 min selection
HOW TO USE
1.Insert adapter jack into the socket found on back of the massage chair, then plug
the adapter into a wall outlet(see Figure A)
2.Turn the unit ON by pressing the POWER button once, The LED will illuminate
when power is on.
3.Turn on the massage in each zone by pressing the BACK,THINGS buttons. LEDs
will illuminate when each zone is activated. To turn off a zone, press the button
again.
4.To choose a desired massage mode, press the MODE button. To change modes,
press MODE button until LED for desired mode illuminates
PULSE---for deep tapping massage
PRESS---provides rapid tapping massage
WAVE----for a gradual, side-to-side vibrating massage
5.To change the massage intensity press the INTENSITY button. The LED for HIGH
or MIDDLE or LOW intensities will illuminate when chosen.
NOTE. Discontinue use immediately if you feel any discomfort or pain.
6.NOTE: for your benefit, the massage chair is equipped with an auto shut-off
feature that .
7.DO NOT use for more than 60 minutes of continuous use.
AUTO
THIGH、BACK
MODE
HEAT
42℃-52℃-62℃
TIMER
12
Werbung
