Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety instructions
For the use of class 2 lasers
Attention: Do not look into the direct or refl ected beam.
Do not point the laser beam towards persons.
■
If a person's eyes are exposed to class 2 laser radiation, they
■
should shut their eyes and immediately move away from the
beam.
Manipulations (changes) to the laser device are not permitted.
■
Never look at the laser beam or the refl ections with optical devices
■
(magnifying glass, microscope, binoculars, ...).
Safety instructions
Dealing with electromagnetic radiation
The measuring device complies with electromagnetic compatibility
■
regulations and limit values in accordance with EMC-Directive
2014/30/EU.
Local operating restrictions – for example, in hospitals, aircraft,
■
petrol stations or in the vicinity of people with pacemakers – may
apply. Electronic devices can potentially cause hazards or interfer-
ence or be subject to hazards or interference.
The measuring accuracy may be affected when working close to
■
high voltages or high electromagnetic alternating fi elds.
Inserting batteries
Open the battery compartment and insert batteries (2× 1,5 V LR6
(AA)) according to the symbols. Be sure to pay attention to polarity.
a
b
c
d
e
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2014/AC:2017
DISPLAY:
f
a
a
a Function selection display
g
b Measurement point (reference)
rear / front
c Display min./max. continuous
h
measurement / area / volume /
angle function 1 + 2 + 3
d Min/max continuous measure
ment
i
e Measurement values /
measurement results /
malfunction / service required
–
Werbung
