Prepare Flight - Intracon FX2 RC Helicopter Handbuch

7. Prepare Flight

• Set helicopter on a flat surface and turn on the helicopter power
• Ensure that you are at least on meter away from the helicopter
• Recheck the area to make sure that you have a save distance from people and other living
creatures around you.
• Turn on the transmitter power, the state indicator light begins to slowly flash, push up the left
joystick to the highest position, the indicator light will flash quickly, then pull the joystick back to the
lowest position, the indicator light is constantly on, the helicopter is ready to fly. If the indicator light
keeps slowly flashing after the above procedure, the power is too low. Please check the batteries
on the helicopter and on the remote control.
16