Charging - Intracon FX2 RC Helicopter Handbuch

6. Charging

with USB AC-Adapter (optional)
• First turn OFF the helicopter's power, then connect the adapter.
Charging with Controller
• Open the cover on the left side of the remote control
• Connect Cable to helicopter
• Power LED will change to yellow indicating properly charging
• full charge will take about 40 minutes
Charging with USB Wire
• Connect delivered USB cable to helicopter and USB Port
• full charge will take about 40 minutes
Charging with AC-Adapter
• A separate AC-Adapter from 110V/230V to USB 5V can be purchased. Only use this Adapter to
charge the helicopter.
with USB wire connected to a Computer
15
with integrated Controler Cable