Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Note: The filter insert can be ea-
sily fitted inside the filter housing
but this must be done with care.
When the filter insert is properly
positioned, it should be correctly
seated flush inside the housing.
Cleaning the filter insert
Place the lifting handle supplied through the lugs on top of the filter
element and lift out the element.
We recommend cleaning at 3-month intervals. Some conditions may
require the filter insert to be cleaned at shorter intervals,
while cleaning at six-monthly intervals is sufficient in other situations.
Nevertheless, the filter insert should always be cleaned at intervals of
at least six months.
Important: Make sure that the filter insert is positioned correctly when
you place it back inside the housing. It must fit flush inside the housing.
The filter insert can be cleaned easily and very effectively in a
dishwasher. The filter mesh can also be cleaned manually using
a dishwashing brush, warm water and commercial washing-up
liquid in order to remove any greasy dirt.
Never leave the rainwater storage tank or access shaft unsuper-
vised when it is open! Place the cover over the shaft or storage
tank before you leave! Only specialist personnel are allowed to
enter the rainwater storage tank or access shafts. These person-
nel must be supervised at all times and wear appropriate protec-
tive gear (e.g. recovery harness).
14
Werbung
