avantor VWR OX 4110 H Bedienungsanleitung Seite 4

English
Overview
Keypad
4
EN English
OX 4110 H
The OX 4110 H meter enables you to perform measurements (D.O.) quickly and
reliably.
The OX 4110 H meter provides a maximum degree of operating comfort, reli-
ability and measuring certainty.
Keys are indicated by brackets <..>.
The key symbol (e.g. <OK>) generally indicates a short keystroke (under 2 sec).
A long keystroke (approx. 2 sec) is indicated by the underscore behind the key
_
symbol (e.g. <OK
<F1>: Situation dependent function (is shown on the display) e.g.:
_
<F1 >: <F1>/[Menu]: Opens the menu for measurement settings
<F2>:
<F1
_
<F2 >:
<On/Off>: Switches the meter on or off
<MODE>: Selects the measured parameter
<CAL>: Calls up the calibration procedure
_
<CAL >: Displays the calibration data
<STR>: Saves a measured value manually
_
<STR > : Opens the menu for the automatic save function
<RCL>: Displays the manually stored measured values
_
<RCL >: Displays the automatically stored measured values
<><>: Menu control, navigation
<OK>: Opens the menu for measurement settings / confirms entries
_
<OK >: Opens the menu for system settings
<HOLD>: Freezes the measured value (HOLD function)
>).
_
>/[Menu]: Opens the menu for system settings
OX 4110 H
ba77026y04 05/2021