Inakustik REFERENZ AC-3502 Bedienungsanleitung Seite 7

LOOKING AFTER THE PRODUCT
Disconnect the components from the power supply before cleaning them Always clean the components with a soft, dry and lint-free cloth, or with
a brush. Do not under any circumstances use scouring powder, alcohol, benzine, furniture polish or similar substances.
POWER CABLES / POWER BARS
When using multiple power boards and extension cables, pay special attention to the DIN VDE 0100 part 420, para. 4.1 (risk of fire in electrical
installations). Furthermore, the VDE 0100-410:2007-06 also requires short breaks of 0.4 s for the TN system. The temperature of the cable may
rise in such cases to the point of causing a fire. Therefore, the following applies to ALL power boards: Do not connect them in a row and do not
use if covered!
For power bars with two-pin relay, the units connected to the switched sockets will be reliably and 2-pin (also known as all-pin) disconnected from
the mains. However, the absence of voltage in the unit is only ensured when the mains plug is disconnected.
DESCRIPTION
Video and audio quality starts at the mains. Unfortunately, the power grid is usually heavily loaded and enriched with a wide range of interferen-
ces. Many especially digital equipment, switched-mode power supplies, car charging stations and photovoltaic systems generate strong distortions
on the network, which cause problems for the connected audio devices. The power supplies and audio circuits in the audio devices are stressed,
but can only compensate parts of this interference. The rest influences the audio signal and covers the sound of the HiFi System like a veil.
The Referenz AC-3502 Power Station includes, among other things, high-quality mains current filters that are specially designed for high-end
applications. Specially developed filter networks divert relevant distortions to ground. In this way, fine facets of the music keep alive and can be
discovered more clearly.
FEATURES
• High Effective Filters
• Symmetrical Star Power Distribution
• High Quality Sockets
• High Current Mains Connector IEC C-20 Sockets
• All Pole Power Disconnecting
• Over Voltage Protection
• Brusched Aluminum Front
• Metal Housing
• Made in Germany
INSTALLATION
After unpacking the Power Station, place it in the desired location. Please note the safety instructions. Connect the devices to the AC-3502 accor-
ding to the respective operating instructions. If you want to connect your system in the correct phase, the markings on the sockets will help you.
Ask your specialist dealer about this. Finally, connect the Power Station to the mains. After checking all connections switch on the Power Station on
the front. BEFORE being disconnected from the mains in order to prevent data losses. This is particular important when switching off the AC-3502!
BEDIENUNGSANLEITUNG REFERENZ AC-3502
7