Renkforce RF-MCS-200 Bedienungsanleitung Seite 2

Operating Instructions
Microphone stand, microphone pop filter and
mobile holder
Item No. 2369289
Intended use
This stand features an upgraded sturdy metal frame with strong springs to provide extra support.
It is designed to hold microphones securely, and effectively reduce noises and vibrations. The
microphone boom arm rotates 360 degrees and offers a horizontal reach of 65 cm.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described, the product may be damaged. In addition,
improper use can result in hazards. Read the instructions carefully and store them in a safe
place. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Microphone arm • Microphone shock mount
• Microphone pop filter • Table clamp
• Mobile holder • Cable tie x4
• Microphone clamp • 3/8" to 5/8" thread adapter
• Microphone cap • Operating instructions
Up-to-date operating instructions
Download the latest product information at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product.
• Consult an expert when in doubt about the operation, safety, or connection of the
appliance.
• Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Caution:
• To avoid damaging the components, do not attempt to open or repair the product
without professional guidance.
• Proper use helps to prolong the lifespan of the product.
b) Connected devices
Also observe the safety and operating instructions of any other devices which are
connected to the product.
Operating elements
6
2
1
8
9 4 5 7 3
1 Microphone pop filter 6 Mobile holder
2 Microphone arm 7 Cable tie x 4
3 Microphone shock mount 8 Table clamp
4 Microphone clamp 9 3/8" to 5/8" thread adapter
5 Microphone cap
Operation
1. Fix the table clamp onto a surface up to 2.1" in thickness.
2. Fix the microphone arm (can be rotated 360 degrees) to the table clamp and tighten the
screw to fix it in place.
3. Install the mobile holder onto the stand and tighten the bracket cap to fix it in place.
4. Install the 3/8" to 5/8" thread adapter if required. This can be used if the microphone stand
does not fit your microphone.
5. Install the shock mount and adjust it to a suitable position according to the size of the
microphone. Microphones with a diameter up to 2.05" can be used.
6. Install the microphone clip.
Care and cleaning
• Disconnect the product from the mains before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol, or other chemical solutions as
they can cause damage to the housing and functioning of the product.
• Clean the product with a dry, fibre-free cloth.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set
up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
Technical data
Load capacity ...............................................2 kg
Mobile holder range ......................................120 - 170 mm
Operating/storage conditions ........................ -20 to + 50 °C
20 - 80 % RH (non-condensing)
Dimensions (W x H x D) ...............................145 x 420 x 70 mm (folded)
Weight ..........................................................480 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE. *2369289_v3_0223_02_dm_mh_4L