cecotec ROCK'NCUT SHURIKEN Bedienungsanleitung Seite 9

- Never use the appliance near hot surfaces.
- Do not use the appliance outdoors and always place it in a
dry environment.
- Ensure that the mains voltage matches the voltage specified
on the device rating label and that the plug is earthed.
- The appliance is not intended to be operated by means of an
external timer or separate remote-control system.
- Always disconnect the appliance from the power supply if
it is left unattended and before assembly, disassembly, or
cleaning.
- Switch off and unplug the appliance before changing
accessories or nearby parts that move during use.
- Do not immerse the cable, plug, or any other non-removable
part of the device in water or any other liquid or expose
electrical connections to water. Make sure your hands are
dry before handling the plug or switching on the device.
- Do not wash the appliance in the dishwasher.
- Check the power cable regularly for visible damage. If the
power cable is damaged, it must be replaced by the Technical
Support Service of Cecotec or similar qualified personnel to
avoid risks.
- Do not carry the appliance by the cable. Make sure the cable
is not trapped or stepped on. Do not wind the cable around
the appliance and do not bend it.
- Do not let the cable hang over the edge of the working
surface or worktop.
- Strictly follow the instructions in this manual to avoid injury
or damage to the appliance.
- Be careful when handling the cutting disc, when using the
appliance, and during cleaning.
- Do not use accessories not provided or suggested by
Cecotec, as these could cause damage to the appliance or
result in hazards.
ROCK'NCUT SHURIKEN
9