C) Radio Remote Control And Wireless Keypad - Renkforce DA-2311 Bedienungsanleitung

6 : Signal output 2 – (an open collector output)
•
A collector output active and open for two seconds, controlled by channel 2 of
the radio remote control or a wireless keypad and permitting a periphery control.
Possible periphery includes an automatic door opener or switching on and off of
an alarm system. This output is the equivalent to a normally open contract that is
pulled to ground when switching (-). The maximum resilience of this power input is
24 V/100 mA, which permits operating small devices like a relay.
7 : Signal output 3 – (an open collector output)
•
A collector output active and open for two seconds, controlled by channel 3 of the
radio remote control or a wireless keypad and permitting a periphery control. Possi-
ble periphery includes an automatic door opener or switching on and off of an alarm
system. This output is the equivalent to a normally open contract that is pulled to
ground when switching (-). The maximum resilience of this power input is 24 V/100 mA,
which permits operating small devices like a relay.
8 : Signal input for the "Leaving house" function
•
A normally open signal output regarding ground.
To this signal input, you can connect a "Leaving house" button to open a locked door
from the inside. Activation of this signal input works as activation of signal output 1
by a wireless keypad or a radio key. If you want to connect several "Leaving house"
buttons to the signal input, switch them parallel to the input. Leave the input open if it
is not to be used.
9 : Ground (-) – Total ground of the system
•
This mass point is equal to that of signal input 2.
10 : Doorbell – The signal input for the doorbell
•
This signal input, which is normally open and can be connected to an external button
to activate the doorbell. It works like triggering the doorbell by the radio key or the
wireless keypad. If you want to connect more than one doorbell button, switch them
in parallel.

c) Radio remote control and wireless keypad

The DA-2311 receiver is delivered with two radio remote controls and is also compati-
ble with the wireless keypad DK-2310. All in all, the device supports up to 40 radio keys
and wireless keypads. Their ID codes must be entered into the system before they can
control signal outputs 1, 2, 3, or the doorbell.
20