Herunterladen Diese Seite drucken

Manta Comet MSP4008 Bedienungsanleitung Seite 17

Werbung

14. Please do not use or place batteries in places of high
temperature such as in direct sunlight, as this will cause the
battery to leak and overheat, lower performance, and shorten
the battery's life.
15. Please do not continuously charge for more than 24 hours.
CHARGING YOUR PHONE
1. Connect the connector of charger to the mobile phone.
The battery level indicator flashes on the screen. Even if the
phone has been turned off, the charging image still appears,
indicating that the battery is being charged. If the phone is
overused when the current is insufficient, it may take longer
time for the charging indicator to appear on the screen after
the charging begins.
2. When the battery level indicator does not flash and indicates
the battery is full, this indicates the charging has been comple-
ted. If the phone is off during charging, the charging being
completed image also appears on the screen. The charging
process often takes 3 to 4 hours. During the charging, the
battery, phone and charger gets warm, this is a normal
phenomenon.
3. Upon the completion of charging, disconnect the charger from
ACAC power socket, and from the mobile phone.
NOTES:
1. The standby time and call duration provided by the
manufacturer are based on ideal operating environment. In
practice, the battery's operating time varies depending on ne-
twork conditions, operating environment and usage methods.
2. Make sure the battery has been installed before charging.
It is best not to remove the battery while charging.
3. Upon completion of charging, disconnect the charger from
your phone and the power supply.
4. If you have not disconnected the charger from your phone
and the power supply, the charger will continue to charge the
battery after about 5 to 8 hours when the batter level decre-
ases substantially. We advise you not to do like this, as it lowers
your phone performance and shortens your phone life.
EN
16

Werbung

loading