Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Owner's manual
Rear camera:
Before installation, choose the correct place for mounting. Mounting
place has to be installed in a way, that it does not obstruct field of view.
Rear camera can be installed in two ways:
• On mounting tape. Peel off first piece of paper from the tape and stick
it to the camera's mounting bracket. Peel off second piece of paper
from the tape and stick the camera do selected place.
• On screws. Drill the holes in selected place and screw in the camera.
During drilling make sure, that no damage is done to any wire,
especially for safety systems.
After connecting the 2,5 mm plug to the AV socket in the dashcam, the
view from rear camera will appear in the top left corner of the display. If
red wire will be connected to the reversing lights (for example with quick
connector), after shifting into reverse gear, the view from rear camera
will be enlarged, helping the driver with maneuvering the vehicle.
MICROSD CARD INSTALLATION
1. Place the microSD card in the proper slot of the device (with pins
facing the lens) and press gently, until it clicks.
2. To take out the card, press it gently. When the card slides out of the
slot, take it out.
Notes:
• The microSD card in the device will be treated as storage device. It is
advised to format it first.
• Use microSD cards with class 10 or higher, with maximum capacity of
32 GB.
TURNING ON AND OFF
• To turn on the device:
◦ Press and hold the power button
◦ If the dashcam is connected to the cigarette lighter socket, the
EN
camera will turn on automatically after ignition and start recording.
• To turn off the device:
◦ Press and hold the power button
◦ If the camera is connected to the cigarette lighter socket, after
turning off the engine, the dashcam will turn off after 10 seconds.
12
Owner's manual
NAVIGATING THE MENU
• Press the menu button to go to setting menu or to cancel selection.
• Press the power button to confirm options.
• Use the up and down buttons to navigate the menu.
• Press the mode button to switch between recording, taking pictures,
and browsing files modes.
Recording
• If the microSD card is inserted and correctly formatted, the recording
will start automatically after providing the power to the dashcam (from
cigarette lighter socket or from USB port).
• To start or stop the recording press the power button, while in
recording mode.
• Press the menu button to change the recording settings. Press the
menu button to change the general settings.
• In order for camera to turn on and start recording after shake, turn on
the Parking guard on (in the recording menu). Select the desired
sensitivity of the function in the G-sensor menu.
Taking pictures
• To take a picture, while in the photography mode, press the power
button.
• Press the menu button to change the picture taking settings. Press the
menu button to change the general settings.
Browsing files
• Use the up and down buttons to switch between files.
• To play the video file press the power button. During playing the video,
use the up and down buttons to control playing speed. Pressing the up
and down button again will change the playing speed.
• To delete or lock the file, press the menu button and select the option.
To change the dashcam settings, press the menu button again.
Dashcam settings
• LCD Brightness: set the time of automatic power off of the display (the
camera will keep on working).
• Auto Power Off: set the time of automatic power off after idle (does not
apply for recording).
13
EN
Werbung
