Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Warning - the microphone is located on the bottom
of the phone, when overlapped (eg with your hand),
the other side will not hear or will hear very poorly.
Installing the SIM NANO and microSD card
Switch your phone off before installing the card.
1. Carefully pull the SIM or microSD card holder
from the side of the phone, insert the cards into
the drawer, so they fit into the place and then put
the drawer back into the phone.
2. You can use the 2x NANO SIM or 1x NANO SIM
and 1x microSD card, according to diagram.
Charging the battery:
Before putting your phone into service you must
recharge its battery for 100%.
1. Connect the adapter to the charger. USB-C can
be rotated from both sides. Yet when attaching the
connector, do not use violence.
2. Connect the charger to the wall outlet.
3. If the battery is fully charged, disconnect the
phone from the charger.
Switching the phone on / off / sleep mode
Make sure that the phone has a SIM card and the
battery is fully charged.
Press and hold the ON/OFF button to switch on the
phone.
Werbung
