Intended Use - REV MAX! Cube Bedienungsanleitung

The MA X! Cube provides a user-friendly means of
configuring MAX! Components with the MAX! Software and
the MAX! Portal. It can also be used to query the status of
the individual components.
As a LAN gateway, the device is thus the data interface
of the system. Furthermore, it provides a storage location
for all configuration data. Radio communication between
MAX! Components is bi-directional. This ensures that the
information sent reaches the recipient.
With an existing Internet connection, there are various ways
of controlling the system. The MAX! Cube can be accessed
using a browser via the Internet portal, using a smartphone
application and with the local software.
Please note that you can only access the MAX! Cube
via the Internet portal if the local software is inactive.
Configuration settings for all terminals are made via the
user-friendly MAX! Software. Different settings can be
made for individual rooms. Settings (e.g. weekly profiles)
are transmitted to the MAX! Radiator Thermostats in the
system (so these also function independently without the
MAX! Cube).
The device may only be operated indoors and must be
protected from the effects of damp and dust, as well
as solar or heat radiation. Using this device for any
purpose other than that described in this operating manu-
al does not fall within the scope of intended use and shall
invalidate any warranty or liability. This also applies to any
conversion or modification work. This device is intended
for private use only.
14

1. Intended use