Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USER MANUAL
INSTRUMENT MICROPHONE
Dynamic Microphone
The OMNITRONIC
KDM-1000 PRO
designed for studio and live applications and is ideally suited for
low-frequency musical instruments, e.g. trombone and bass amplifier
Safety Instructions
!
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used
for other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
!
Protect the microphone against humidity and heat. The ambient temperature must always be
between -5° C and +45° C.
Setting into Operation
Screw the holder onto a stand with 1.5 cm thread. For stands with 1 cm thread use the supplied
adapter screw. Connect the microphone via a balanced microphone cable with 3-pin XLR plug to the
XLR microphone input of your audio unit (e.g. mixing console).
Cleaning
For cleaning the microphone only use a dry cloth. Never use chemicals or water.
Technical Specifications
Type:............................Dynamic
Directivity pattern: ........Hypercardioid
Frequency range:.........20 Hz - 12 kHz
Impedance:..................600
Sensitivity: ...................-85 dB
Weight: ........................815 g
Please note: Every information is subject to change without prior notice. 10.07.2009 ©
for Bass Instruments
is a dynamic microphone with hypercardioid characteristic
W
direct pick-up of kick drums and other
.
www.omnitronic.com
KDM-1000 PRO
00052368.DOC, Version 1.0
Werbung
