Herunterladen Diese Seite drucken

Velleman VTLAMP4WN Bedienungsanleitung Seite 2

Lupenleuchte mit standfuß

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

VTLAMP4WN – LAMP ON STAND WITH MAGNIFYING GLASS
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted
municipal waste; it should be taken to a specialised company for recycling. This device should
be returned to your distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, don't install or use it and contact your dealer.
2.
Contents and Assembly
1. Take the lamp and the base out of the packaging.
2. Secure rods #1 and #3 by tightening knobs #2 and #4.
3. Remove screw #5 from the base (#6).
4. Insert rod #3 into the base (#6) and secure it by fastening screw #5.
5. Insert the power plug (#7) into a power outlet.
6. Switch the lamp on by means of the switch #8.
3.
Replace the Lamp
Unplug the device and let the circular fluorescent lamp cool down before replacing it.
The lamp (#9) is located behind a plastic diffuser (#10) and is held in place by three metal clamps.
1. Remove all screws that hold the plastic diffuser in place and gently remove the diffuser.
2. Carefully take the defective lamp from the clamps and remove it.
3. Install a new lamp (order code LAMP22) by connecting it and securing it in the metal clamps.
4. Put the diffuser back and fasten its screws.
4.
Beware
• Never leave the magnifying lens unattended where direct sunlight may pass through it: this
creates a fire hazard.
• Use the lamp only indoors.
• If the power cable is damaged, have it replaced by your dealer.
• The only user-serviceable part is the lamp. Have a qualified person service the device should it
become defective.
5.
Technical Specifications
Height
Power Supply
For more info concerning this product, please visit our website www.velleman.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman Components
nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or
reduced to any electronic medium or otherwise without the prior written consent of the copyright
holder.
VTLAMP4WN
46cm
230VAC/50Hz
2
VELLEMAN®

Werbung

loading