Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATING INSTRUCTION (ECD30 / ECD50)
1) Please read the installation instructions carefully to understand how to install
device.
2) Remember that the device must be unfolded to start working. Press the switch to (0)
position (Power indicator is off)
3) Plug the power cord into an electrical outlet.
4) Press the switch to (1) position (power indicator will light up), then the device will start
working.
OPERATING INSTRUCTION (ECD25)
1) Plug the power cord into an electrical outlet.
2) (Timer)
Press the ON/OFF button, the red indicator will light up - the device is
working continuously.
Press the upper button once, the blue 2H indicator will light up - the timer is
set for 2 hours.
Press the upper button twice, the blue indicator 4H will light up - the timer is
set to 4 hours.
OPERATING INSTRUCTION (ECD35)
1) Plug
the power cord into an electrical outlet.
2) Press
button, product will start to work, to turn it off
just press it again and the LED will show "OF".
3) TEMPERATURE CONTROL"▼℃ ▲ ": There are 3
modes: "01", "02", "03", when LED shows 01, it means
low temperature, when you press "▲" button, LED will
change to mode 02 and temperature will be moderate.
Press it again for mode 03, it will be high temperature. Press "▼" button, the mode and
product temperature will decrease.
4) TIMER "▼⊕ ▲ " ： the timer can be adjusted from 0.5H(hour) to 7H. When product starts
to work, the timer is originally set to continuous operation, press "▲" button for first time,
LED will show 0.5 and it means after half an hour, product will stop. Each time you the
button, time will increase by half an hour, the longest setting is 7 hours. After pressing "▼"
the time setting will decrease.
5) Please turn the appliance off and take the plug out from the outlet if not in use.
11
Werbung
