Quicke Unigrip 130 Originalbetriebsanleitung Seite 17

Driving instructions
4.2.6. Operating instructions
To avoid damage to the plastic, the upper part of the grapple
arms should be placed at the same height as the middle
of the bale. Transport the bale horizontally - crowd it to
vertical once at the loading/storage location.
The bale should be turned at as high a height as possible.
Avoid longer transportation distances, as the grip can
reduce, due to inner oil leakage in the loader control valve.
Fig.23 Operating instructions
4.2.7. Parking the implement
Do not disconnect the cylinder from the implement at any
of the end positions - difficulties may arise due to over-
pressure, when the quick connections are to be connected.
See also the chapter "Connection and disconnection of the
implement" in the loader operating manual.
15