Havit HC1243 Benutzerhandbuch Seite 8

Operating instructions
Charging
1. Fully Charge the battery for 6 hours before first use.
2. To charge, connect the DC end of the supplied 26 V adapter to the batter
charging port and plug the AC side cable into the wall outlet.
3. The average running time is about 4 hours depending on the speed level and
pressure during use.
Operating
1. Power the device on by moving the main power switch on the bottom of the
battery to the ON position, power the device off by moving the power switch to
the OFF position.
2. Press the ON/OFF switch on the top to turn the device to the level 2 speed and
three times for level 3 speed. Each press of the button will increase by one level
until level 5 speed. Press the button 6 times to enter the standby mode (battery
level indicator light on), the battery level indicators will show the corresponding
battery level. Press again to turn to and each press to add one level.
Maintenance, Cleaning & Storage
Use slightly damp towel to clean the device and dry it with a soft cloth.
For storage or travel, store the device in a supplied portable bag.
8