Letsfit AE02 Benutzerhandbuch Seite 20

Before using the console, please install the two AAA batteries (included) in the console.
Power on
1. Plug the sensor cable into the sensor input on the back of the console.
2. Press the "SELECT" button and LCD screen lights up.
Start a training
When you start cycling, the console calculates your cycling time, current speed, distance
and calories burned.
During the training
The screen of the console will display the cycling time, current speed, distance and calories
burned in turn every 5 seconds in scan mode (default setting).
You can press the "SELECT" button to stay at the data you want to view.
After the training
After ending a training, you can press the "SELECT" button to check your cycling time,
distance and calories burned data in turn.
Clear training data:
Press and hold the "SELECT" button for approximately 3 seconds until the data is cleared.
Power off
When you are not cycling or pressing the "SELECT" button, the console will automatically
turn off after four minutes.
18