Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
INSTALLATION
PREPARATIONS
1.
Read these instructions carefully before installation and save
them for future reference.
2.
Always comply with the applicable laws and regulations for
the installation and use of auxiliary lights.
3.
Disconnect the negative/chassis earth cable from the battery
before connecting the product, to avoid damage from short-
circuiting during the installation.
4.
Follow as far as possible the existing cable routing for
installation of new cables. Carefully fasten the cable and
any excess length with cable ties, insulating tape or the
equivalent.
5.
Cable grommets through the firewall should be at a safe
distance from moving parts.
CABLE COLOUR CODING
Black wire is – for floodlight, warning light, red wire is + for
floodlight, yellow wire is + for warning light, white wire is + for
signal wire.
1.
Frequency setting
When the signal wire is supplied with voltage one of the
three flashing patterns is activated automatically.
2.
Frequency synchronisation on installation of several light
bars.
14
Werbung
