Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
CONNECTING THE POWER SUPPLY
Connect the power supply by plugging the power plug of the wind/sun sensor to an existing, properly connected outlet.
Properly connected IP44 outdoor socket
NOTE
If you wish to change the mounting type(s), it may be necessary to disconnect the connection cable of the
wind and sunlight sensor. Disconnect the solar sensor and reconnect it after changing the location.
WARNING
There is always a risk of death from electrocution when working on electrical installations. Electrical
appliances and electrical installations must be powered off before performing any work, maintenance, or
repairs and must only be performed by qualified and authorized personnel. All standards and regulations
concerning electrical installation must be observed.
(symbolic illustration)
12
Werbung
