Carson X-Crawlee PRO Betriebsanleitung Seite 21

Trouble Shooting
Problem
Model doesn´t move
Loss of control
Doesn´t run straight
Doesn´t stop
Doesn´t reverse
Running too slowly
Cause
Transmitter or chassis power switch is not
"ON"
Batteries have run down
Batteries have run down
Front and rear wheel nuts are too lose
Wrong action
Batteries have run down
Motor has lost power
Rear wheel nuts are too loose
Dust or foreign objects are inside gears
Correction
Switch power on receiver or transmitter
Change batteries or charge them
Change batteries or charge them
Attach receiver antenna and/or transmitter
antenna screw tight
Make adjustment
Tighten wheel nuts
Make adjustment
Make adjustment
Change batteries or charge them
Change to spare motor
Tighten wheel nuts
Turn the power switch "OFF" and clean out
gears