Buffalo FC375 Bedienungsanleitung Seite 7

Electrical Wiring - FC376/FC377
FC376 and FC377 are supplied unplugged and require
hardwiring to a suitable electrical power supply
capable of supporting 6KW at 230V/50hz.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal
marked E
This appliance must be earthed.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of
any obstructions. In the event of any emergency
disconnection being required they must be readily
accessible.
Connection to a suitable power supply
should only be carried out by a qualified and
competent electrical engineer.
For model FC377:
Compliance
The WEEE logo on this product or its documentation indicates that the product must
not be disposed of as household waste. To help prevent possible harm to human
health and/or the environment, the product must be disposed of in an approved and
environmentally safe recycling process. For further information on how to dispose of
this product correctly, contact the product supplier, or the local authority responsible for
waste disposal in your area.
BUFFALO parts have undergone strict product testing in order to comply
with regulatory standards and specifications set by international,
independent, and federal authorities.
BUFFALO products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying,
Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the right to change specifications
FC374-FC375-FC376-FC377_ML_A5_v3_20211026.indb 7 FC374-FC375-FC376-FC377_ML_A5_v3_20211026.indb 7
recording or otherwise, without the prior written permission of BUFFALO.
without notice.
For model FC376:
UK
7
2021/10/26 11:36 2021/10/26 11:36