Herunterladen Diese Seite drucken

RedNeck GAT-6 Benutzerhandbuch Seite 12

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ASSEMBLY
Caution!
Please first screw in all screws carefully by hand. Turn the screw 2-3 times so that it easily connects to
the thread.
Please do not fully tighten the screws until all screws have already been pre-assembled, otherwise
damage may occur.
Additional information before setting up:
Before you tighten the screws completely, check the screws beforehand and then tighten them careful-
ly. Please mount the pieces of furniture on level ground and make sure that the pieces of furniture are
perfectly centered so that wobbling can be prevented.
What not to do:
Do not use the furniture if parts are missing, damaged or worn.
Do not use electrical tools for the assembly, as these can damage the furniture.
Do not overtighten the screws.
Do not leave the furniture in the rain and protect the furniture from bad weather. In winter we recom-
mend that you store the furniture elsewhere.
12

Werbung

loading