Herunterladen Diese Seite drucken

fontastic Cero Bedienungsanleitung Seite 4

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

GB
We hereby declare, that this device carries the
CE mark in accordance with the regulations
and standards. It conforms with the fundamental requi-
rements of the (RED) 2014/53/EU directive.
The full text of the EU Declaration of Conformity is
available at the following Internet address
www.d-parts.de/Konfo
Note on environmental protection:
After the implementation of the European
Directive 2012/19/EU in the national legal
system, the following applies: Electrical and
electronic devices may not be disposed of with
domestic waste. Consumers are obliged by law to return
electrical and electronic devices at the end of their
service lives to the public collecting points set up for this
purpose or point of sale. Details of this are defined by
the national law of the respective country. This symbol
on the product, the instruction manual or the package
indicates that a product is subject to these regulations.
By recycling, re-using the materials or other forms of
utilising old devices, you are making an important
contribution to protecting our environment.
5
Bedienungsanleitung
Vielen Dank, dass Sie sich für dieses Fontastic
Headset „Cero" mit aktiver Geräuschunterdrückung
entschieden haben. Bitte lesen Sie die Bedienungs-
anleitung sorgfältig und beachten Sie die Sicherheits-
hinweise.
Verpackungsinhalt
• 2 x Drahtloses Headset Cero
• Aufbewahrungs- und Ladeetui
• USB Type-C™ Ladekabel
• 3 Paar Ohrpassstücke
• Bedienungsanleitung
Übersicht:
1. Multifunktions-Sensor
2. LED-Anzeige/Mikrofon
3. Lautsprecher
4. Silikon-Ohrpassstück
5. Headset-Ladekontakte
6. Mikrofon
7. LED-Ladegehäuse
8. USB-C
-Schnellladeanschluss
®
Inbetriebnahme
Laden der Headsets
Stecken Sie die Headsets in die Einschübe des
Ladeetuis. Schließen Sie das Ladeetui. Durch das
Schließen des Ladeetuis bekommen die Headsets
Kontakt und werden im Etui automatisch aufgeladen.
Laden des Etuis
Verbinden Sie das Ladekabel, das mitgeliefert wurde,
mit dem Type-C
Ladeeingang des Etuis und einem
®
Reiselader oder USB Port eines Computers, um die
eingebaute Batterie aufzuladen.
Die Ladestatus-Anzeige blinkt rot während des Ladevor-
ganges, wechselt zu weiß nach vollständiger Aufladung
und erlischt nach einigen Sekunden.
An-/Ausschalten
Automatisch:
Nehmen Sie beide Headset-Einheiten aus dem
Ladeetui, sie schalten sich automatisch ein.
Stecken Sie die Headsets in das Ladeetui und schließen
Sie es, die Headsets schalten sich automatisch aus.
D
TWS
®
2
4
1
3
5
6
7
8
6

Werbung

loading