Mixx Audio ColourChroma 3 Schnellstartanleitung Seite 3

The Portable Charging Case
6
Always connect the case via the USB C port [6] , to a suitable USB
wall charger, computer USB port or a power bank using the USB C
8
charging cable (8) supplied. Plug the supplied cable into the USB
C port [6] on the charge case.
6
The charge light indicator (7) will blink RED, on and off, to show the 7
case is charging.
7
7
LET'S CONNECT
First time pairing
5
Remove both earbuds from the Portable Charging Case [5] .
They will automatically dual pair together; a voice will prompt
"Power on, pairing" and a 'Beep' will sound. One of the Earbud
2
LED Lights [2] will flash WHITE to indicate pairing mode. If the
earbuds do not automatically dual pair together, tap each earbud
4 times to power off and then place them both back into the
r
case. Remove the earbuds and they should automatically dual
pair together.
Go to the Bluetooth settings on your audio device and select 'MIXX
ColourChroma 3' from the list. Once paired successfully you will
2
hear "Connected" and the Earbud LED Light [2] will turn off.
You can now enjoy your music, watch a video or take a call hands
free.
The earbuds will automatically reconnect to the last device they
were paired with, confirming "Connected".
5
Placing both earbuds back in the Portable Charging Case (5) and
closing the lid will power them off. (note – if the earbuds do not
turn off, the battery in your charging case needs to be recharged –
see 'Let's Stay Charged.'
EN
2