Hollyland Solidcom C1 Pro Bedienungsanleitung Seite 7

Quick Guide
Configuring the Hub on the Web Server
Turn on the hub, connect it to a computer using a network cable via the RJ45
interface on the hub and the network port on the computer, configure the same
network segment for the computer and hub, open a browser on the computer, and
then enter the following addresses (Check the corresponding addresses through the
network menu on the hub):
Default IP address of a master hub: 192.168.218.10
Default IP address of a remote hub: 192.168.218.11
You can log in to the web server (default password: 12345678 ) to upgrade the hub,
perform headset grouping, and set headset states.
EN-5