Changing The Bulb; Cleaning And Maintenance - Sentiotec A-910 Installations- Und Gebrauchsanleitung

Installation instructions, only for experts
3. Operation

3.1. Changing the bulb

Only use max. 60 W, E 27 type bulbs. Use of other bulbs can lead to overheating.
The power supply must be disconnected before changing the bulb.
If the bulb is changed directly after failure, you must first leave the bulb to cool down for
a sufficient period.
Remove the protective cover and the protective glass.
Carefully unscrew the defective bulb from the socket.
Carefully insert new bulb into the socket. Do not use force or excessive pressure.
Before commissioning, check that the bulb is properly positioned in the socket. Replace
the protective glass and protective cover.
When assembling ensure the correct position of the seal between the lamp housing and
the protective glass.

4. Cleaning and maintenance

Before cleaning you must ensure that the light is disconnected from the power supply.
Use a dry or slightly moistened cloth for cleaning.
Never clean with chemicals or abrasive cleaners.
5. Disposal
● Dispose of packaging materials in accordance with the applicable
waste disposal regulations.
● Used devices contain reusable materials as well as hazardous
substances. Therefore, do not dispose of your used device with
household waste, but do so in accordance with the locally appli-
cable regulations.
p. 5/6
EN