Error Codes And Flashing Sequences; Flashing Sequences Of The System Led (A) - HomeMatic IP HmIP-FAL24-C10 Installations- Und Bedienungsanleitung

If the duty cycle is exceeded, this is indicated by three
long flashes of the device LED, and may manifest itself
in the device temporarily working incorrectly. The device
starts working correctly again after a short period (max.
1 hour).
10.3

Error codes and flashing sequences

10.3.1 Flashing sequences of the system LED (A)

Flashing code
Short orange
flashing
1x long green
lighting
1x long red
lighting
Meaning
Radio
transmission/
attempting to
transmit/
data
transmission
Transmission
confirmed
Transmission
failed
Troubleshooting
Solution
Wait until the
transmission is
completed.
You can continue
operation.
Please try again (s.
„10.1 Command
not confirmed"
on page 72).
73