Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DECRIPTION OF THE DEVICE
(1) Fixation screw
(2) Mounting bracket
(3) RGBW LED
SETUP
Attachment
Fasten the device to a wall or ceiling with the mounting bracket. Always choose screws and plugs which are
suitable for use in your wall/ceiling and have enough holding power. Fasten the device in such way that it will
not fall down.
Connection to the mains
The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts.
1
Connect the device via the mains cable to a grounded mains socket. Thus the unit is switched on.
2
To switch off the unit, disconnect the power plug.
3
Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains
outlet which is switchable.
Operation
After connecting the device to the mains it is ready for operation and can be operated via the EUROLITE IR-
7 remote control.
Auto program/Sound program
In automatic and sound modes 2 show programs are available.
Auto 1: Color blending
Auto 2: Color change
Sound 1: Color blending
Sound 2: Color change
(4) Infrared sensor for the remote control
(5) Power input
(6) Housing
12/16
00113808, Version 1.0
Werbung
