Wisi OV 96A Betriebsanleitung Seite 6

1. Features
2. Preparation
3. Text in display
3.1 Display after
switching on (example)
- 6 -
CI = Common Interface for insertion of a
Conditional Access Module with Pay-TV programme card
"Free to Air" and "Pay-TV" reception of a DVB-QPSK
satellite signal and decoding of an MPEG-2 signal
Processing of the audio/video signal in the recommended
OV 36A (stereo) or OV 35A (mono) modulator
Teletext-Empfang (not available on all programmes)
Input frequency 950 - 2150 MHz
Four-key operating panel
LCD display
Interface for audio/video: 5-pin DIN-AV socket
Before setting the converter, you need the following information,
which can obtained from the programme provider:
1. SAT-If input frequency
2. Symbol rate
Encoded programmes – Programme providers
You can obtain a Pay-TV programme card and the Conditional
Access Module from programme providers such as: Irdeto,
Nagra, BetaCrypt, Conax, SECA/Mediagard, Videoguard,
Cryptoworks, Viaccess etc.
Sources: satellite magazines,
http://www.satcodx.com — http://www.lyngsat.com
http://www.eutelsat.org — http://www.astra.de
Signal? = No SAT-IF signal available.
Incorrect SAT-IF input frequency
Incorrect symbol rate
Signal?... 6.3 e-3 ... <1.0 e-4
measured cyclically and the current value is displayed.
busy = Values are currently being set or saved.
Note:
No inputs are possible while this is displayed.
OV 96A = Unit designation
V 1.0 = Software version
Mod-No. = Module number
0
After 5 seconds, the display change to:
OV 96A = Unit designation
1548MHz = SAT-IF input frequency
<1.0 e-4 = Current bit error rate
(GB)
= The bit error rate is
busy may take up to 60 seconds
950 - 2150 MHz
3500 - 30000 Ms/s