HumanCentric 101-1019-V3 Bedienungsanleitung Seite 4

STEP 2
Attach adapter bracket to monitor
If there is a screw in the hole
above the stand slot on the
back of the monitor, remove
and keep the screw. (This may
not be present on all models.)
Insert the bracket into the stand slot.
Note that it may not click into place, but
will still be secure. Then insert the 12mm
mounting screw and washer through the
top of the bracket and into the hole in
the monitor. Tighten securely.
© 2023 HumanCentric Ventures LLC www.humancentric.com 4