RAC 02 + Media Player
Safety instructions
Do not block the ventilation slots of the chassis. This will cause the temperature rising and may result in
fire. Disconnect the power cord before removing the cover.
If the following circumstances will occur, please immediately switch off the power and disconnect the
power supply plug from the AC-outlet. Do not try to operate the amplifier again. Contact your local dealer
to check the amplifier:
- Damages are visible
- The device has fallen
- The device contains loose parts or any liquid gets into the amplifier
- The device shows malfunctions
- Smoke or strange smell is coming out of the device
- The power supply cord is damaged, such as exposure of the core, disconnection etc.
- The device has been stored for a longer period under bad conditions such as open air or in
damp rooms
- The device has been exposed to hard transport conditions like badly packing
This appliance may only be used in accordance with its intended purpose: Internet radio in a public
address system.
4 General information
Switching on and off of the device should be made from the STAND BY button.
The time synchronization is thus maintained.
Note: When you turn off through then main POWER switch, the alarm function is deactivated.
Programmed alarm time however remains.
5 External resources
To operate unit, following external resources are needed:
- A power source (AC 230 V mains supply) or (DC 13,2 V ~ 27 V)
- A wired (Ethernet) or wireless (Wi-Fi) network (provided through a router) with appropriate
permissions and password if necessary (for Internet radio and Network Music player modes)
- Broadband Internet access for Internet radio mode.
- A music library stored on the network or on a USB mass storage device (for Music player modes),
- An external audio source (for Aux in mode)
ic audio GmbH
Boehringerstraße 14a; D-68307 Mannheim; Germany
5
EN
Fon: + 49(0) 621 / 77096-0; Fax: + 49(0) 621 / 77096-26
E-Mail: info@ic-audio.com; www.ic-audio.com
ic audio