Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6) DISPLAY INSTRUCTION:
1.
Double 8 digital display 15*14mm , 0.36inch Common Cathode.
2. Ten LED lights as below, except the digital display.
Remote control
1.
Open the battery box on the back of the remote control, install a battery of 3V CR2032.
2. Align with the receiver to operate.
3. To place the battery, pull out the battery box as shown. Insert the battery with the correct polarity.
The remote control will restart after pushing back the battery box.
7
Werbung
