Instruction Manual - Cardigo Marder-Frei Indoor LED Gebrauchsanweisung

MARTEN REPELLENT, INDOOR

Instruction manual

Art.-No. 90160
Dear client,
thank you for choosing one of our quality products. In the following, we will explain
the functions and operation of our product. Please take the time to read through the
instructions carefully. Please take some time to read through the instructions carefully.
Please note all the included safety and operating instructions. Keep this manual safe
and ensure that you include it when passing on the product on to a third party. If you
have any questions or suggestions about this product, please contact your supplier or
our service team.
We would appreciate it if you would recommend us to others, and we hope you enjoy
using this unit.
1. Functionality
The Marten Repellent Indoor, LED is a device that generates an ultrasonic signal with
a frequency between 12 and 23 kHz at intervals of 15 seconds on and off. Additionally
it will generate a flash lasting four seconds every 26 seconds. This ultrahigh frequency
and the flash are most irritating to martens and cats. The irritation is so disturbing and
comfortable, that they will very soon leave the affected area and stay away. The Marten
Repellent Indoor, LED is recommended for attics, garages, stables and barnes. It is also
effective against mice rats and other rodents.
2. Getting Started
The device is simply plugged into a 230 V mains socket and is immediately ready for
operation. After putting in the plug the flashlight on the housing will start flashing.
The sound is emitted in the direct line from the device. The device should not be placed
behind curtains or furniture so that the distribution of the ultrasonic sound is not dam-
pened. Make sure that the device is placed in the immediate vicinity of the area that
is to be protected.
Status: 05/17
7