Seite 1
H A Z E T- W E R K HÖCHSTE TECHNOLOGIE IN DER WERKZEUGFERTIGUNG SEIT 1868 HIGHEST TECHNOLOGY IN TOOL MANUFACTURE SINCE 1868 9021 SR-1 Betriebsanleitung Schlag-Ratschenschrauber Operating instructions Impact ratchet...
Seite 3
Unfallverhütungs vorschriften und allgemei- nen Sicherheits bestimmungen einzuhalten. Immer persönliche Schutzausrüstung tragen! HAZET-WERK Hermann Zerver GmbH & Co. KG Always wear personal protective equipment! ; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY [ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-375 • ^ hazet.de • ] info@hazet.de...
Seite 4
Zu Ihrer Sicherheit 2. Bestimmungsgemäße 1. Verantwortung Verwendung des Betreibers • Das Gerät ist zum Zeitpunkt seiner Ent- Die Betriebssicherheit ist nur bei bestim- wick lung und Fertigung nach geltenden, mungs gemäßer Verwendung entsprechend anerkannten Regeln der Technik gebaut der Angaben in der Betriebsanleitung und gilt als betriebssicher.
Seite 5
Verletzung dritter Personen führen. Immer persönliche Schutzausrüstung tragen! HAZET-WERK Hermann Zerver GmbH & Co. KG Always wear personal protective equipment! ; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY [ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-375 • ^ hazet.de • ] info@hazet.de...
Seite 6
Zu Ihrer Sicherheit • Gerät nicht in explosionsgefährdeten • Griffe immer trocken, sauber, öl und fett Räumen verwenden. Werkzeuge wie frei halten. • Achten Sie auf einen sauberen, gut gelüf Schleifer können Funkenschlag verur- teten und stets gut beleuchteten Arbeits sachen, der zur Entzündung brennbarer bereich.
Seite 7
Lieferumfang: 9021SR-1 Schlag-Ratschenschrauber, mit Luftanschlussnippel 12,91mm (1/4“) Immer persönliche Schutzausrüstung tragen! HAZET-WERK Hermann Zerver GmbH & Co. KG Always wear personal protective equipment! ; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY [ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-375 • ^ hazet.de • ] info@hazet.de...
Seite 8
Aufbau und Funktion 2. Vor Inbetriebnahme Die Benutzung, Inspektion und • Zur Betätigung Werkzeugs Wartung von PneumatikWerk Betätigungshebel drücken. zeugen muss immer entspre • Zum Stoppen des Werkzeugs Betätigungs- chend lokalen, staatli hebel loslassen. chen Landes oder Bundes • Beachten Sie, dass das Werkzeug nach bestimmungen erfolgen.
Seite 9
Richtlinien zum Umweltschutz eingehalten werden. Immer persönliche Schutzausrüstung tragen! HAZET-WERK Hermann Zerver GmbH & Co. KG Always wear personal protective equipment! ; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY [ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-375 • ^ hazet.de • ] info@hazet.de...
Seite 10
Ersatzteile • Aus Sicherheitsgründen dürfen nur Original- Ersatzteile des Herstellers verwendet werden. • Falsche oder fehlerhafte Ersatzteile können zu Beschädigungen, Fehlfunktionen oder Totalausfall des Werkzeuges führen. • Bei Verwendung nicht freigege- bener Ersatzteile erlöschen sämtliche Garantie-, Service-, Schadensersatz- und Haftpflichtansprüche gegen den Hersteller oder seine Beauftragten, Händler und Vertreter.
Seite 11
Immer persönliche Schutzausrüstung tragen! HAZET-WERK Hermann Zerver GmbH & Co. KG Always wear personal protective equipment! ; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY...
Seite 12
For your safety 2. Intended Use 1. Owner's liability Operational reliability is only guaranteed if • The tool was developed and manufactured the tool is used as intended in accordance according to the technical norms and stan- with the information in the operating instruc- dards valid at the time and is considered to tions.
Seite 13
Immer persönliche Schutzausrüstung tragen! HAZET-WERK Hermann Zerver GmbH & Co. KG Always wear personal protective equipment! ; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY...
Seite 14
For your safety • Do not use the tool in rooms with an • Always keep the handles dry, clean and explosive atmosphere. Tools such as san- free of grease or oil. • Ensure that the working area is clean, well ders can cause sparks that may ignite com- ventilated and always well lit.
Seite 15
Included in delivery: 9021SR-1 impact ratchet, with 12.91 mm (1/4“) air connection nipple Immer persönliche Schutzausrüstung tragen! HAZET-WERK Hermann Zerver GmbH & Co. KG Always wear personal protective equipment! ; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY...
Seite 16
Design and function 2. Before starting the operation • The direction of rotation is set via the setting on the top of the housing. pneumatic tools must always be used, inspected and • The speed can be adjusted using the setting maintained in compliance with screw on the housing.
Seite 18
Spare parts • For safety reasons, only the manufacturer’s original spare parts may be used. • Unsuitable or defective spare parts may cause damage, malfunction or total failure of the tool. • The use of non-approved spare parts will void all warranty, service and liability claims as well as all claims for compensation against the manufacturer or its agents, distributors and...