Eufab 16257K Bedienungsanleitung Seite 14

Parking mode button (Position 12 in the overview)
Press the Parking mode button before switching the camera off. The „P symbol" will be shown in the top right
of the display. After the camera is switched off, it is in Parking mode, see also the „Gravity sensor" in section
6.5 Functions.
6.6 PLAYING/VIEWING THE RECORDINGS
In order to view the recorded videos and photos, press the Mode button to switch to Play mode. Use the cursor
buttons to select the desired video or photo. Press the OK button to view the video or photo.
In order to view the recordings on your computer, insert the memory card into an appropriate card reader
and connect to your computer.
6.8 TROUBLESHOOTING
Turn the tip of the 12 V connector of the charging cable anti-clockwise until it is released from the connector
and it can be removed. The fuse is exposed and can be removed from the connector. Replace the fuse with
another of the same strength and screw the tip back into the connector.
Fuse: ø 6 x 30, 2 A, fast-blowing, 250 V
6.7 REPLACING THE FUSE
Error/Fault
No function
No saving possible
14
Possible cause
The connector of the monitor cable
has not been inserted into the 12 V
vehicle socket.
The fuse of the monitor cable
connector has been triggered and
must be replaced.
The fuse of the 12 V vehicle socket
has been triggered and must be
replaced.
The battery is empty (only when
used without charging cable)
The memory card has not been
inserted correctly
Write protection of the memory card
has been activated
The memory card is not formatted
There is not sufficient memory space
The memory card is defective
Assistance/solution
Plug the connector of the charging
cable into the 12 V vehicle socket.
Replace the fuse in the monitor cable
connector
Replace the fuse in the fuse box of
the vehicle
Use the charging cable to connect
the camera to the 12 V vehicle
socket.
Insert the memory card properly
Deactivate the write protection of
the memory card
Format the memory card (Format in
section 6.5 Functions)
Delete some files in order to free up
memory space
Try using a different card