Eufab 16257K Bedienungsanleitung Seite 13

Exit the menu using the mode button.
Settings in the photo menu (symbol shows a photo camera in the top left of the display):
Resolution:
Image quality:
Sharpness:
White balance:
ISO:
Exposure compensation:
Stabiliser:
Exit the menu using the mode button.
In Standby mode:
Camera settings (spanner symbol at the top left of the screen):
Park mode:
Volume:
Date/Time:
Language settings:
Screensaver:
Light frequency:
Format:
Defoult setting:
Version:
Mode button (Position 14 in the overview)
Pressing the Mode button multiple times allows you to switch the function modes in the following sequence:
Video mode – Photo mode – Play mode.
Select the resolution for your photos:
12M – 10M – 8M – 5M – 3M – 2M HD – 1,3M – VGA
Select the image quality for your photos:
High quality – Standard – Low quality
Select the sharpness setting for your photos:
Strong – Standard – Soft
Set the white contrast for your photos in order to get images that are true to
colour.
Automatic –Sunlight – Cloudy day – Light bulb –Wolfram (light bulb)
– fluorescent (fluorescent tube)
Set the sensitivity of the camera.
Automatic – 100 – 200
Here you can set the brightness of the photos.
+2.0 ...+0.0 ... -2.0
Switch the image stabiliser on/off.
Switch off – switch on
Briefly press twice opens the menu for the camera settings. With the cursor
buttons (Positions 11 and 13 in the overview), you can select the various menu
items. Press the OK button to open the selected menu item. Use the cursor buttons
to select the setting in the menu item, and confirm by pressing the OK button.
If the stop mode is activated, the video recording is saved automatically in the
event of an impact (this recording is not deleted automatically). Three levels may
be set for the severity of the impact.
Switch off – 2G (light impact) – 4G – 8G (serious impact)
0 to 3
Set the date and time using the cursor buttons and confirm each entry by
pressing the OK button. Press the menu button to exit this menu item.
Set the menu language and confirm the selected language using the OK
button.
Set whether and when the screensaver is to be activated.
Adjust the frequency to the power supply in your country.
50 Hz – 60 Hz
The memory card is formatted, all data is lost.
Cancel – Confirm
The factory settings of the camera are restored.
Cancel – Confirm
Shows the version of the software on the camera.
13