Technical Data; Intended Use - EMAG Emmi Bedienungsanleitung

1. Gerätebeschreibung
2. Operating instructions
The room disinfector is suitable for humidifying and disinfecting the air.
Prior to commissioning, the tank must be filled with water - up to the MAX line printed on the inside of the tub.
Before plugging in the mains plug, make sure that the voltage indicated on the type plate corresponds to the mains voltage (Germany 230 V~ /
50 Hz). Switch on the device by pressing the operating disk „POWER" (1). The device starts with medium power and indicates the operation with
green LED light ring (2). To increase or decrease the room desinfector On the top of the device there is a rotating nozzle for the moisture outlet.
The small lid in the middle is removable and covers a recess for fragrances, which can be used as a supplement. To clean or disinfect the device, it is
essential that you first pull the power plug out of the socket. The appliance must not be placed in the hands of children!

3. Technical data

Parameter
Length
Width
Height
Capacity
Power supply
Protection class
Performance
Technical changes reserved!

3. intended use

The product may only be used for the application intended in the catalogs and technical descriptions. Any other or additional use is considered
improper. In the event of improper use, the seller assumes no liability for any damage that may occur and no guarantee for the faultless and
functional operation of the components. Intended use also includes observing all instructions in the operating manual. This is indicated by the
symbol on the type plate. Proper and safe operation of the products requires proper transport, storage, installation and assembly as well as
careful operation and maintenance. The recurrent tests according to BGV A 3 must be observed. The unit must be installed in such a way that the
mains plug is freely accessible at all times.
2
1.
2.
1.
Value
150
150
340
2,5
230 / 50
IP 20
28
1. pushbutton operating panel
ON/OFF
+ Increase in performance
- Power reduction
2. LED color display of the
Performance level
blue = high
green= medium
red= low power
3. power rating see
Nameplate/ underside
Unit
mm
mm
mm
I
V / Hz
-
W