aqprox! appMPMINI Gebrauchsanweisung Seite 23

2. HOW TO CONNECT TO TV
Connect HDD player to TV by AV
Warming: confirm the Video output setting is the
Press the R/C HDMI/AV button to set up the output mode on you HDD
media player.
3. HOW TO CO NNECT THE POWER SUPPLY
1. Connect the AC adapter cable plug in the unit
2. Plug the AC adapter into wall outlet.
4. POWER SUPLY
Power supply must
adapter,
Set up the unit on "STANDBY" mode before cut off power supply to avoid
the hard disk leads to irreparable destroy.
5. HOW TO CHANGE R/C BATTERY
1. Put out the Battery door, the battery doo
Simply pull the tab to open the battery door.
2. Position the battery (including) so it sits in the battery holder correctly,
make sure the polarity (the + and the – sides of battery) is correct.
6. REMOTE CONTROL OPERATION RANGE
1. Remote control operation range: Within 6m
<60°
2. Effective distance of remote control will be difference according to
different lightness of environment.
F ILE FORMATS SUPPORTED
- MPEG4 Programs, include: DivX3
- MPEG2 DVD ,MPG, VOB files;
- MPEG1 VCD , MPG/DAT;;
- Mp3/WAV/AC3/WMA
- JPEG/JPG.
/HDMI cable.
be DC 5.2V/2A;
.11 to DivX5.0, XviD1.0, AVI, etc.;
same with your TV mode.
system's jack.
don't connect the unit with wrong
r is located on the rear housing.
from front panel , angle:
21